DON'T USE OTHER MANDRELS THAT CAN SCRATCH AND STRETCH YOUR BORES!!
Used by the FASTEST pro racers in the country. These are hands down the best solution for sanding and polishing Derby wheels. The Turbo Chucks hold the wheel firmly without marring the wheels to allow you to obtain the smoothest, fastest finish possible! Simply insert the Turbo Chuck/Pot Chuck into a hand power drill, drill press or lathe and have perfectly sanded/polished wheels in minutes!
PLEASE NOTE: The Turbo POT Chucks ARE compatible with Awana/PineCar wheels. However, you will need an Awana/PineCar specific Turbo Chuck (the one that grips the wheel from behind) for Awana/PineCar weels. If needed please specify this in the notes at check out!
Package contains:
1 - Turbo Chuck for sanding and polishing the tread and outer hub
1 - Turbo Chuck for sanding and polishing the tread and outer hub for pre 2009 wheels
1 - Turbo Pot Chuck (1.18 sized) for sanding and polishing the tread edge and inner hub on stock BSA and BASX wheels down to 1.16" in size.
1 - Turbo Pot Chuck (1.12 sized) for sanding and polishing the tread edge and inner hub on lathed BSA wheels that are 1.12" or smaller.