Wheels prepared by the Pinewood Derby National Champion

These are race-ready wheels, selected, graded, balanced, and prepped by current professional league Pinewood Derby National Champion Dan Inman (DWS Racing). Starting with a thorough, rigorous multi-point selection, grading, and truing process, only the cream of the crop makes the cut. They are graded on a scale from 1.0 to 5.0, with 5.0 being a near-flawless, championship-quality wheel. Those wheels were meticulously balanced, polished, and sealed by Dan using his multi-national title-winning wheel preparation process.

The wheels have the following specifications/features (please check your rules to ensure your race will allow them):

Diameters averaging between 1.165 and 1.170 inches
Weights averaging between 2.30 and 2.375 grams
Bore sizes ranging from 0.0965 to 0.0975 inches
Average widths (from outer sidewall to inner tread edge) of .40 inches
Outer hub double step removed
Coned inner and outer hubs
Fluting (tread bumps) around the outer tread edge removed
Inner tread edge flattened
Practically no measurable radial or lateral runout
All wheels have ID and grade markings on inside of wheel and, in some instances, removal or addition of material for weighting/balancing purposes (see photo)
Sets are not mold-matched
No additional polishing or sealing needed (and is highly discouraged)

These wheels are specifically designed for rail riding setups where only three wheels contact the track. As a result, they are packaged as a set of three (3) along with a fourth stock (unprepped) wheel used as the raised/lifted wheel.

Please note that the supplies for these wheels are extremely limited. Pricing as follows:

- Grade 5.0 = $90

- Grade 4.9 = $85

- Grade 4.8 = $80

- Grade 4.7 = $75

- Grade 4.6 = $70

- Grade 4.5 = $65

More information on Dan Inman (DWS Racing):