CNC cut from Official BSA Blocks!
These bodies are cut from actual BSA blocks, making them legal in practically every Scout Pinewood Derby race! Coming in at approximately .320" thick, these bodies slice through the air maximizing speed with a low aerodynamic profile, also known as "thin to win"! Additionally, with over 87% of the wood weight removed from the block, the racer can optimize their weight placement, increasing speed! With large weight pockets, the racer can maximize the car's potential energy and fine-tune the balance using tungsten cube weights (available here on Turbo Derby!)
These bodies come in two options:
1) With the stock axle slots
2) Without the stock axle slots (axle holes will need to be drilled by the racer)
PLEASE NOTE: The weight pockets are approximately .26" deep and designed for weights of that thickness or less. Additionally, the bodies come flat with the same thickness across their length. To maximize the car's speed, racers should shape/sand the nose to a point. If desired, Turbo Derby can do this for you as an option (see below).
- Shape the nose to a point
- Heavy duty adhesive to hold the weights in their pockets and thick foil tape to cover them. Turbo Derby will apply two-sided, heavy-duty adhesive tape in the weight pockets. Remove the protective backing and install your weights. A strip of thick foil tape is supplied so the racer can cover the weights once installed in the car.
top of page
bottom of page